Animal Waste Incinerator
Helios A 130: Hot Hearth Thermal Oxidation System
The Helios A 130 Animal Waste Incinerator (formerly known as the Vulcan A 140 Animal Waste Incinerator) is engineered with a hot hearth design and mazed secondary combustion chamber to effectively and efficiently cremate pathological remains. Perfect for veterinarian clinics and animal hospitals, these incinerators can provide a safe disposal system for animal remains and waste.
Standard equipment located on the Helios A 130 includes an integral remains collection hopper and hydraulic actuated guillotine charging/clean-out door for complete removal of waste. Typical estimated capacity for this unit is 130 lb/hr (for Type IV Pathological remains). See all incinerators here.
Animal Waste Incinerator Specifications
| System Capacity*: | 130 lb./hr. (for Type IV Pathological remains) |
| Intermittent Feed: | 4 yd3/hr (3 m3//hr) up to 8 hrs/day |
| Electrical Requirements: | 230/460 V 3phase, 60 Hz, 50/40 amp, single point connection |
| Required Fuel: | 1.5 MMBtu/hr @ 16" w.c. @ 1.5" header |
| Overall Dimensions: | 11'-9" L x 4'-8" W x 7'-9" H |
| Approx. Weight: | 18,000 lbs |
| Primary Chamber | Secondary Chamber | |
|---|---|---|
| Chamber Volume | 39.5 cu.ft. | 51.7 cu.ft. (provides 2 sec. retention) |
| Hearth Area | 16.73 sq. ft. | |
| Burner Capacity | 500,000 Btu/hr. (hi/lo/off modulated control) | 1,500,000 Btu/hr. (fully modulated control) |
Combustion Air Specifications
| Combustion Air Fan: | 1350 scfm 5 hp, 230/460 V, 3phase, std. |
| Hydraulic Door Power Unit: | 2 hp, 115/230 V, 60 Hz, 3450 rpm, 5 gpm, 450 psi, 3 gal res. |
Exhaust Breaching Specifications
| Shell Construction: | 3 x 3 x 1/4" sq. tube frame structure (A501) 3/8" end plates & 1/4" plate casing (A36)12 gage (A366) insulated, removable side panels |
| Hearth: | 6"-11", 3000° F dense cast refractory |
| Side Walls: | 4.5 x 2.5 x 9 2700° fire brick 2" 1900°F & 1/4" 550K insulation backing |
| PPC Roof: | 6" 3000° cast refractory |
| SSC Floor: | 50% dense / 50% insulating cast refractory 5" thick |
| Stack: | 24" od x 20" id x 48" L sections (14'-6" rise above grade w/std. 2 sections) |
| Shell Lining: | 11 ga. CS shell with 2" 2400° refractory lining |
| Draft Control: | Integral draft induction w/temp. reduction to 950°F |
Systems Control: Standard system controls featured on our incinerators is the Siemens S-7 Series PLC with Touch-screen operator interface. Controls include the following;
- Primary & Secondary Chamber Temperature Control
- Temperature Actuated Fuel and Air Control
- Burner Interface, Status and Reset Access**
- System Status and Alarm Display
- Hydraulic Systems Control
- Opt. Oxygen Monitoring & Air Control for max. fuel efficiency available
**Discrete, UL, CSA, FM & IRI burner control w/U.V. flame supervision provided for each burner.
Animal Waste Incinerator Benefits
- Ideal for pet memorial services, animal hospitals and clinics, humane societies, veterinarians, animal growers, animal control, and animal shelters
- Efficient cremation of pathological remains
- Packaged as uni-structure cremation systems
See all Incinerators here.
Questions? Call our sales team at 1-772-646-0597 to discuss your animal waste incinerators requirements.