Animal Waste Incinerators

Helios 0.5 Solid Waste Incinerator

solid waste incineratorThe Helios 0.5 Solid Waste Incinerator (formerly known as Vulcan 0.5) is a multi-purpose unit designed to help effectively dispose of solid waste streams. Used for municipal waste, solid waste, and even animal waste, these units help effectively destroy your materials through a controlled combustion process.

Solid waste is first located into the primary chamber where materials will be incinerated for the first time. Primary Chambers typically feature a 95% carbon combustion. From here, waste will moved into a secondary chamber where it is incinerated for a second time to destroy additional potential contaminates. The combined system provides a product that can safely and effectively destroy waste.

Animal Waste 0.5 System Specifications

System Capacity*: 0.5 Me-too/hr. waste combustion, providing 55-85 lb./hr. processing capacity for waste streams with an average gross HHV range of 5500-8500 But/lb.
Find BTU Values for your waste
Batch Capacity: Approve. 19-20 cu. fl. per 4-6 hr. batch cycle.
Intermittent Feed: (w/optional loader): 8 ft3/hr., up to 8 has/day
Electrical Requirements: Single point - 230V, 3 dial, 60 Hz, 50 amp w/optional loader

*System Capacity Notes: The system capacity listed for each incinerator will typically include both a Me-too/hr. and a lb./hr. rating. The pounds per hour is listed in a range. Actual ratings will vary depending on the type of waste being incinerated.

All solid wastes are classified and rated with a typical BTU Value. Knowing your waste type and intended quantity will help our team determine which end of the range the incinerator will be able work towards.

Helpful Links

Questions about Helios Incinerators? Call our specialists at 1-772-646-0597.

Helios 0.5 Incinerator Technical Specifications

Primary Chamber Secondary Chamber
Type: Fixed Hearth with Controlled Over & Under Air Injection Cyclonic Thermal Oxidizer with 1 sec r/t
Chamber Volume: 25.2 ft³ 17. 1 ft³
Hearth Area: 8 ft²
Burner Capacity: 0.4 MMBtu/hr. nom
(Hi-Lo-Off Control)
0.5 MMBtu/hr
(full modulating, excess air control)
Construction: Shell: 0.25" thick, A36 plate 0.25" thick, A36 plate
Construction: Lining 3.25", 2800°F 750 psi, (Plicast 3100KK) 3.25", 2800°F 750 psi, (Plicast 3100KK)
Construction: Insulation 1" 1900°F Fiber
(ASTM C612093, type V)
1" 1900°F Fiber
(ASTM C612093, type V)

Combustion Air Specifications

Combustion Air: Supply to Burners, Under Fire, and Secondary Air Injection
3 HP, 230/460 V, 3 dia. 60 Hz
550 cfm @ 16" W.C. Pressure

Exhaust Breaching Specifications

Shell Construction: 10 gauge, A36 Carbon Steel
Lining: 3" 2400° F, 175 PSI
(Plicast AL-Tuff LWI-24 or equal)
Weight: 155 lbs./ft (70.45 kg/ft)

System Controls

incinerator controlsTypical controls found on these solid and animal waste incinerator systems include a Siemens S-7 series PLC with touch screen operator interface. This allows the operator to control the amount of air being injected into the system. Typical controls found on these units include the following:

  • Primary & Secondary Chamber Temperature Control
  • Temperature Actuated Fuel and Air Control
  • Burner Interface, Status and Reset Access
  • System Status and Alarm Display
  • Hydraulic System Control (Applicable with Optional Loader)

Optional Loader Types

  • Type: Hydraulic Ram Feed (optional cart tip hopper load available)
  • Hopper Volume: 14 cu. ft. (.4 m3)
  • Power Unit: 5hp, 230/460 V, 3 dia, 1800 psi
  • Hydraulic Cylinders: 2500 psi:
  • Charge Door - two 2" bore, 28" stroke
  • Charging Ram: 2" bore, 38" stroke
  • Hopper Lid: one 2.5" bore, 16" stroke
  • Charging Frequency: 15 minutes, up to 4 times per hour
  • Approx Weight: 4,500 lbs

Optional Guardian-OCS: Oxygen monitoring combustion air control (Increases fuel efficiency of the system by 25% & provides dynamic combustion control to prohibit upset conditions)

Incinerator Benefits and Additional Models

animal waste incineratorsThe 0.5 Solid Waste and Animal Waste Incinerators are one of many models designed to help quickly and effectively dispose of your solid waste streams. These units are ideal for areas dealing with a significant amount of trash, waste, rubbish, animal remains and other materials.

Animal Waste Incinerator Advantages:

  • Controlled Incineration Process
  • Easy Maintenance, Loading and Disposal Process
  • Dual Chambers for Limited Emissions to the Atmosphere
  • Environmentally Safe Stack Exhaust
  • Easy Load Areas Chambers
  • Multiple Components to Customize the Unit and Increase Efficiency

Incinerator Typical Uses:

  • Veterinarian Clinics
  • Breeding Farms
  • Industrial Facilities
  • Businesses
  • Precious Metal Recovery
  • Solid Waste Disposal

In addition to the 0.5 model, we also offer smaller and larger systems to accommodate different disposal requirements. For more information on these and other solid and animal waste incinerators please check out our Commercial Incinerators.

Questions about our animal waste incinerators? Call our sales team with any questions at 1-772-646-0597.